ECON-SD800 Automatic Efficiency Solder Dross Separation Machine
ECON-SD800 Automatic Efficiency Solder Dross Separation Machine
Model
ECON-SD800

Item specifics

Power Supply
3P 4¢ 380V /AC
Weight
500KG
Working Power
1.8KW

Review

Description

ECON-SD800 Automatic Efficiency Solder Dross Separation Machine

   Our company has accumulate nearly ten years marketing experience.The engineers could deeply know the demand of clients ,enviroment 

and the safety,So the most advanced technology could be integarated into the product. Tin residue is the main thing that our device facing .

After the equipment processing,the dross will be refined ,and the recycled tin could be reused.This Intelligent and efficient model could be

 used under offline situation ,and no worker is needed.During the working,the only thing you need to do is putting dross into the  machine 

without any chemical .When the temperature reach 280 degree,the tin qualified for using would be purifed.By using our machine,a large 

mount of tin could be saved and the mount of the cost  will reduce.

Product features and parameters:

Electronic System:


    1, HITECH GUI interface:WEINTEK   TAI WAN 5.7" touch creen

    2Built-in time control system: time pre-setting, automaticturn on/off

    3PID function heating mold with zero touch

Dross loading system:
In-phase screw scraps dross and drive it into mixing  aera which equped with dross powder container of 30kg capacity.
Mixing System:

     1100kg capacity with outside heating mold melting system. It maks tin warm up evenly and                       rapidly, save energy.

     2400W 380V 3P mixing motor uses worm wheel structure to avoid motor directly connect with                   high temperature part.

    3 Special designed mixing structure makes dross evenly melted.

    4 Temperature couple check liquid dross temperature and feedback acurately.

Pure Tin Molding System:

    1When pure tin reaches to 30kg, the machine automaticly discharge the tin out to the container.

    2Molding slot: 1.3kg/slot, 16pcs slots

    3Automatic output device: in-phase with discharge sysyem to collect and output the pure solder.

    4 Inner force cooling system makes solder bar cool down in short time.

Fog purify system:
Water filtering + activated carbon filter cotton, filtering the smoke particles and peculiar smell gas
Body Parameters:

    1Streamline appearance with 3D design, green arc glass to see the operation and easy                           maintenance.

    2Power Supply: 3P  4 380V /AC

    3SizeL1800mm*W1050mm*H1600mm;
    

    4Weight: 500KG 

    

    5Power5.8KW 
    

    6Working Power 1.8KW