SM-620 Guillotine type PCB Separator

Group Guillotine type PCB Separator
Min. Order 1 piece
Terms of Payment all
Update Time 2019-07-10
Item specifics
Shear Length0-330mm
Shear Width0-unlimited
Shear Thickness0.2-3.0mm
Shear Speedone segmentation per second
Blade Size356×45×6mm
Height of component≦15mm,when component is on upper side ≦19mm, when component is on back
Distance between component and V-slo≧3mm


Separate precise SMDthin board, aluminum PCB, for special board , please check with Service.

 PCB Depaneling machine



Apply latest pneumatic design of light weight, thePCB could be separated in one time, with minimum internal stress, especiallysuitable to separation of precise SMD or thin board. Unlike double round bladePCB separator, there won`t be any bow wave or micro crack generated.


It uses wedge cutter to shear PCB in line, internalstress decreases to lowest point, even the sensitive SMD modules or capacitancestill won`t be influenced, then potential risk on quality is minimized.


Cutter blade applies SKH-11 high speed steelimported, also suitable to separate PCB without V-slot.


1、double straight blade, highly suitable to separateSMD thin board and aluminum PCB

2、Guillotine type, for PCB of thickness 0.2 to3.0mm, cutting moving distance 1 to 3mm, safe operation.

3、keep internal stress within 80-180Ue, toavoid micro crack and damage to precise components.

4、able to shear edge of V-slot, distance fromthe component should 0.3mm

5、shear rate is one segmentation per second,control by foot-plate pneumatic switch

6、with calculation function, obvious vision onproductivity

7、shear blade group is started passively,shear line and position can be handled safely

8、shear not by rolling blade, no dust, nomotor drive, no pollution of carbon dust

9、shear is not by blade friction, so there isno residue from blade

10、Shear Blade warranty 6000000 times, no needelectricity supply, then no consumption on electric equipment.

11、Air pressure 0.4-0.6Mpa, no need to preparespecific place for the shear

12、Could configure moveable working shelf, canmove and operate conveniently.


Technique Parameter



Machine Dimension


Machine Weight


Moveable Shelf Size


Working Voltage


Working Pressure




Shear Length


Shear Width


Shear Thickness


Shear Speed

one segmentation per second

Blade Size


Height of component

15mm,when component is on upper side

19mm, when component is on back

Distance between component and V-slot